Furniture Finish vs. Cutting Board Oil

Cutting Board Oil is non-polymerizing and is designed for food cutting surfaces that need to be washed frequently. Our Furniture Finish line is made of polymerizing oils, hard waxes, and pine rosin and is better designed for furniture that needs a hard surface protection.

How to Use Furniture Finish

Use on hardwoods that are sanded between 220 - 400 grit. The lower the grit, the deeper the oil will soak. The higher the grit, the smoother the wood will feel. To prevent raised grain, always use the "sand, wet, sand" method. Apply thin layer of oil until entire surface is covered. Wipe away excess after 24 hrs. Repeat until desired number of coats and look is achieved. After final coat, allow 24 - 48 hours for surface to become dry to touch. May take up to 1 week to be completely dry to touch and up to 4 weeks to be completely cured. While curing, it's ideal for the wood piece to be kept in a temperature controlled environment. Humidity and high heat can prolong cure time. Keep liquids off surface for up to 4 weeks. For more application guidelines, visit our "Product Instructions" page!

Difference between Furniture Finish and Furniture Butter?

Furniture Butter acts as a 2-in-1 finish and wax, conditioning and protecting the wood in a one step process. Any of these products can be used alone, but our fool-proof method for the best protection is to use Furniture Finish, Furniture Butter, then Furniture Wax in that order.

Is it Food-Contact Safe?

Yes, we only use ingredients that are 100% FDA approved for food contact surfaces to make our products! Our Furniture Finish is made 100% VOC-Free, with zero dryers, metals, or chemicals. 

Project Ideas

Furniture Finish can be used to finish tables, chairs, bookcases, coffee tables, picture frames, and a whole lot more.