Ahonui Artisans x Walrus Oil Epoxy Board Form
Ahonui Artisans x Walrus Oil Epoxy Board Form Ahonui Artisans x Walrus Oil Epoxy Board Form Ahonui Artisans x Walrus Oil Epoxy Board Form Ahonui Artisans x Walrus Oil Epoxy Board Form Ahonui Artisans x Walrus Oil Epoxy Board Form Ahonui Artisans x Walrus Oil Epoxy Board Form Ahonui Artisans x Walrus Oil Epoxy Board Form
$259.00

LIMITED EDITION OF 13, SIGNED AND NUMBERED!
Walrus Oil graphics are made of etched metal plates that will endure countless uses. Form is handcrafted by Ahonui Artisans out of Texas.

Large All-in-1 Reusable HDPE Epoxy Resin Form

12.5" wide x 20.5" long x 2" deep

All measurements are INTERIOR dimensions.

What is included in the box:

  • (1) Pre-sealed and Assembled Ready-to-Pour Large Form with Integrated T-track, Levels, and Leveling Feet 
  • (3) HDPE Clamp Bars
  • (3) Sets of T-track Hardware
  • (1) 3oz. tube of RTV
  • (12) HDPE Clamp Blocks
  • (1) Screwdriver for Leveling Feet
  • (1) Resin Form Instruction Manual
  • Purchase Bonus Coupon Codes

Disclaimer:

This form is intended to save you the hassle of completely rebuilding, taping, spraying releasing agent, and finding clever ways to clamp your work in place. These forms will produce a blank, not a finished product. This form is intended to make setting up and resetting for your next pour as quick and efficient as possible to maximize work flow. It is not intended to produce a final piece that is ready to sell.

Due to the slick nature of the HDPE, there will be minor manufacturing “scuff” marks on the surface of the form. These marks will transfer to your resin but will be planed and/or sanded away very easily when working the blank to final thickness. These scuffs will in NO way affect your final piece.

Purchase Bonuses:

15% off your first purchase of Super Clear and Liquid Glass Products
15% off your first purchase of Black Diamond Mica Pigments
10% off your first purchase of Walrus Oil Products 

About This Product:

This is the last style resin form you’ll ever need. It is constructed of 3/4 inch thick High Density Polyethylene (HDPE). Epoxy resin is unable to adhere to polyethylene so with this form you will never need to tape your forms or use releasing spray again.

The form will be pre assembled, sealed, and ready for a pour as soon as you remove it from the box. The TWO long sides of the form will be “permanently” secured and sealed with RTV silicone gasket maker with bolts and threaded inserts. (These sides can be removed if you ever need them to be, but it isn’t necessary to remove them for normal function.)

Integrated T-track System:

The form also comes with integrated T-slots for attaching your clamp hardware to the side walls. This allows you to use the three included HDPE clamps and hardware, with the help of the 12 included HDPE clamp blocks, to secure your wood in place before making your pour to ensure they don’t move or float during the curing process. The blocks being made from HDPE ensures that your resin does not stick to them in case of over-pouring.

Integrated Leveling System:

The leveling system consists of 4 integrated leveling feet and 2 bubble levels. The integrated leveling feet allow you to level your form from the top using a standard, flat head screw driver (or the included Ahonui Artisans screwdriver). The bubble levels help you visually adjust your form to be level, regardless of your workspace.



Customer Reviews